Limpieza industrial moderna
Reduce energy consumption by up to 30%, conserve water resources, reduce wastewater
volumes, relieve the burden on the environment, replace polluted jobs through
automation or relieve pressure through device construction, promote sustainability
and the circular economy?
This is mycon.
Encuentre su solución
Limpieza manual/automática de intercambiadores de calor
- Our products for manual or automatic cleaning of heat exchangers of all types and sizes, and for general surface cleaning, include:
- Jetmaster– Careful and intensive cleaning of finned heat exchangers
- Jetboy– Ideal device for cleaning small heat exchangers and other surfaces, even under difficult space conditions and within buildings.
- Powermaster– Blasting system that operates with compressed air and water-soluble blasting agents
- IceMaster– Revolutionised dry ice blasting unit.
- TubeMaster– Gently cleans shell-and-tube heat exchangers and individual tubes with compressed air and dry ice or various granulates.
- FluidMaster– A device that can be used in areas that are difficult to access for flushing heat exchangers, moulds and pipes.
- Mini fluidmaster– A compact, mobile version of fluidmaster for smaller requirements.
Sector Ferroviario
- JetMaster, JetBoy SP for cleaning oil coolers, transformer coolers, air conditioners, with optional special automation and auxiliary devices, catchment devices with extraction.
- IceMaster for cleaning wheelsets and bogies, weld cleaning for visual inspection.
- PowerMaster for paint removal and layer stripping.
- SpeedMaster for surface cleaning.
- SplitMaster for separating bonded components.
Cleaning of sulphur condensor tubes
TubeMaster from mycon GmbH cleans tube bundle heat exchangers, especially for the desulphurisation of gas and oil. Since dry cleaning takes place, sulphuric acid cannot form in the tubes afterwards. The inner walls of the pipes can be additionally polished in a single operation. This ensures excellent heat transfer and a longer service life.
Cleaning processes that use water are prohibited when cleaning sulfur capacitors. The resulting acid formation leads to severe corrosion of the inner pipe surfaces, not to mention the traditional method for removing sulfur crete is to drill the layer out of the pipes. This inevitably leads to smaller or larger scratches on the surface of the pipes, which then serve as preferred locations for the formation of new deposits. Major damage can also occur if the drill bits deviate from course and penetrate the steel pipe instead of removing the deposits. Since sulfur condenser tubes are usually made of carbon steel, some corrosion will always occur after a long period of operation. Corroded areas are particularly susceptible to fractures due to the mechanical stress of drilling. Finally, many sulfur condensers use U-tubes, and the curved part of the tubes cannot be reached by drilling. This means that some of the pipes remain unclean and the useful life of this heat exchanger is shortened. With “TubeMaster” all these problems can be overcome.
Acid gas, also known as hydrogen sulfide-rich gas, is produced in various countries around the world. Some of the countries known for their sour gas reserves are:
1. United States
2. Russia
3. Canada
4. Saudi Arabia
5. United Arab Emirates
6. Qatar
7. Iran
8. Kuwait
9. Iraq
10. Nigeria
Sector Industrial/Comercial
- JetMaster and JetMaster AS for cleaning finned heat exchangers.
- FluidMaster and Mini-FluidMaster for cleaning non-detachable plate heat exchangers, non-openable shell and tube heat exchangers, and pipelines.
- TubeMaster and TubeMaster AS for cleaning shell and tube heat exchangers and pipelines.
- PowerMaster for paint removal and cleaning heavily soiled surfaces and layer stripping.
- SpeedMaster for large-scale, gentle surface cleaning.
- IceMaster for cleaning delicate surfaces.
Sector Automoción
- SplitMaster for separating bonded body parts and vehicle batteries.
- FilterMaster for fast, gentle, and eco-friendly cleaning of catalytic converters, exhaust particulate filters, and other filters
- JetBoy for gentle cleaning of radiators.
- Icemaster – Cleaning and deburring of automotive parts.
- PowerMaster
Sector de la aviación
- JetMaster in a special version for cleaning finned heat exchangers (internal and external cleaning).
- SplitMaster for separating bonded components.
Project Example
A wedge of epoxy resin was installed on the underside of the aircraft door to drain away condensation. Upon inspection, it was discovered that moisture had penetrated between the door surface and the epoxy resin wedge. The epoxy resin wedge therefore had to be removed without damaging the rivets/metal lines embedded in the epoxy resin. The PowerMaster from mycon GmbH was used with a special soft blasting agent. The epoxy resin could be completely removed without damaging the materials.
Sector de la Edificación
- JetMaster, JetBoy, JetBoy SP, and JetBoy AS for cleaning finned heat exchangers of air conditioners.
- TubeMaster for cleaning shell and tube heat exchangers of air conditioners.
- PowerMaster for removing paint applications and addressing fire damage.
- SpeedMaster for large-scale, gentle cleaning of building surfaces and facades.
Experienced Staff
Familiar with their jobs and can perform them quickly and efficiently.
Best Quality Services
Providing clients with expert advice and solutions
QUIÉNES SOMOS
Sobre nosotros
mycon desarrolla, produce y distribuye productos y tecnologías de automatización en el sector de la limpieza industrial. Nuestras soluciones innovadoras se crean para cumplir con los requisitos de las aplicaciones cotidianas y han demostrado su eficacia en la práctica a través del uso de nuestra filial Kipp Umwelttechnik.
Mantenimiento de la limpieza industrial
Implementación de un enfoque estructurado para un lugar de trabajo seguro y productivo
-
1
Evaluación
Comprender la industria, el tamaño de las instalaciones y los desafíos específicos de limpieza es crucial para obtener soluciones de limpieza efectivas.
-
2
Planificación
Evalúe las necesidades de los clientes y, a continuación, cree un plan de limpieza personalizado en función del sector, el tamaño de las instalaciones y los retos.
-
3
Ejecución
Los limpiadores experimentados ejecutan el plan, utilizando el equipo y los productos químicos adecuados para una limpieza segura y eficaz de las instalaciones.
-
4
Inspección
Después de la limpieza, realice una inspección para asegurarse de que la instalación cumpla con los estándares de limpieza e higiene del cliente.