Cleaning heat exchangers with JetMaster

mycon GmbH and Kipp Umwelttechnik GmbH solve a problem in the area of air conditioning / ventilation at the airport in Vienna

By cleaning heat exchangers with JetMaster, problems with air-conditioning / ventilation have been solved at the airport in Vienna

Vienna International Airport was founded in 1938, formerly it was used as a military airport. In 1954, Vienna Airport became Austria’s first privately managed airport. The name of the operating company of Flughafen Wien Betriebsgesellschaft m.b.H. changed to Flughafen Wien AG in 1992. Vienna Airport is thus one of the few airports in Europe which is listed on the stock exchange. It is the most important airport in Austria with two runways, around 226,000 flights with 23.4 million passengers (as of 2016). With this large number of people, a fully-functioning air-conditioning system plays an important role for the airport.

Successful cleaning of heavily soiled heat exchangers

At the Vienna International Airport, a large number of lamellar/fin heat exchangers can be seen in the cooling / air-conditioning system as shown in Figure 1.

At the Vienna airport the external heat exchangers were highly contaminated with dust, especially by cement, lime and gypsum dust, due to the surrounding industrial environment. These situations severely impacted the cooling performance. Such pollution causes energy costs to rise rapidly by 10-30% or more. The corrosion caused by contamination can also lead to a significant reduction in the service life of heat exchangers. Several cleaning attempts of the extremely dirty heat exchangers – 10 units with a total area of more than 400 square meters – had been mostly unsuccessful for years. Through a cleaning trial with chemicals, the dusts became very hard like “cement” and the lamellas/fins have started to corrode due to chemical reactions.

In cooperation with the sister company mycon, Kipp Umwelttechnik successfully implemented a combination of “JetMaster” system with three other devices. Significant amounts of residue were removed from the heat exchangers. The cleaning effect was so great that the through-value of the heat exchangers is almost returned to a new state after cleaning.

Mr. Rödler, Facility Management, Head of Domestic Engineering: “The exposed location of our airport in an area with a large number of huge industrial companies has led to a considerable strain on our heat exchangers. With the use of the JetMaster system with several process steps, Kipp Umwelttechnik was the first company which was able to achieve our desired effect of a complete cleaning. All previous cleaning attempts by other companies had been more or less ineffective.”

Figure 2: Contaminated lamellas + cleaning with JetMaster

The JetMaster process and it’s advantages:

The JetMaster process has been developed with the support of the Federal Ministry of Economics and Technology in cooperation with a university and offers considerable advantages such as- high cleaning quality, cost effective and environmentally friendly. JetMaster works exclusively with compressed air and a small volume of normal water (drinking water quality). Compared to cleaning with a high-pressure cleaning instrument, the advantages are obvious: less water consumption, more gentle cleaning without damaging the sensitive lamella/fins, greater cleaning level. A cavitation effect ensures a high cleaning efficiency in less time. By not using chemical additives, there is no additional burden for cleaning staffs and the environment.

Further information on the JetMaster can be found at:

Leave a Reply

Your email address will not be published. Required fields are marked *