Plastics Industry

Suitable Products


Effective and cost-efficient, with unlimited automation


JetMaster AS

Careful, intensive cleaning for finned heat exchangers

JetMaster/JetMaster AS

JetBoy/JetBoy SP

Environmentally-friendly, chemical-free, up to 95% water savings

JetBoy/JetBoy SP

IceMaster process

Automation for cleaning surfaces before painting / coating

The CO2 used for cleaning surfaces is recovered almost exclusively from industrial exhaust gases. Environmental pollution is caused exclusively by energy consumption for recovery / liquefaction and by transport. CO2 cleaning is therefore an absolutely environmentally friendly and residue-free process. IceMaster is the modern process for industrial cleaning with dry ice / dry snow.

Our application examples show the advantages of using the IceMaster system.

The adjacent plant is used for the pre-treatment of plastic parts before coating with the help of the automated IceMaster-system.

Applications Examples in the Plastics Industry

Plastics Industry

JetMaster process

The JetMaster from mycon GmbH is environmentally friendly and saves resources. The water consumption is extremely low with 0.20 – 1.00l clear water per minute. JetMaster works without any additional chemicals. Thus, the amount of waste water is extremely reduced compared to other aqueous cleaning methods and is only polluted by the mostly harmless soiling of the surfaces in this area.

The JetMaster combination system removes even the heaviest contaminants

Heat exchanger after cleaning
Heat exchanger before cleaning with JetMaster
Heat exchanger after cleaning
Heat exchanger before cleaning
Cleaning heat exchangers with the JetMaster system developed by mycon